Modifikovaný BIOS pre K7N2 Delta L

Bios mod verzie 5.7 od Braziliantech

Bios mod verzie 5.8 od Braziliantech

- "IPCA" can be disabled under 'Power Management Setup'.
- "Onboard Serial Port 2" can be disabled under 'Integrated Peripherals' -> 'Onboard SuperIO Device'.
- "CPU Internal Cache" can be disabled under 'Advanced BIOS Features'.
- "CPU VCore Select": 1.300v, 1.425v, 1.450v, 1.475v, 1.500v, 1.525v settings can be selected under 'Frequency/Voltage Control'.
- "DRAM Voltage Adjust": 2.8v setting is available under 'Frequency/Voltage Control'.
- "AGP Voltage Adjust": 1.8v setting is available under 'Frequency/Voltage Control'.
- "Shutdown Temperature" function can be enabled under 'PC Health Status'.
- Fixes non-boot issue when FSB is at 200MHz e multiplier is set to 9x, 10x or 11x.

Bios mod verzie 5.8 od Lumberjacker

- Item "CPU Internal Cache" activated
- Item "Seek Floppy" default setting is "Disabled"
- Item "Hard Disk S.M.A.R.T." default setting is "Enabled"
- Item "Small Logo(EPA) Show" activated
- Item "Super Stability Mode" activated
- Item "AGP Aperture Size (MB)" setting "Disabled" selectable
- Item "T-(RAS)" setting "0" selectable
- Item "CAS Latency" setting "Auto" selectable
- Item "AGP Spread Spectrum" setting "1%" selectable
- Item "AGP Aperture Size (MB)" setting "Disabled" selectable
- Item COM2 changed in "Onboard IrDA Connector" and activated,
- default setting is "2F8/IRQ3" and "2F8/IRQ3" and "2E8/IRQ3 selectable
- Item "IPCA" activated
- Item "Sleep State" default setting is "S3(STR)"
- Item "Power Management" default setting is "disabled" *
- Item "Power Status Led" activated
- Item "CPU Warning Temperatur" default setting is "60°C/140°F"
- Item "Shutdown Temperatur" activated, default setting is "65°C/149°F"
- Item "DRAM Voltage Adjust" setting "2.8 V" selectable
- Item "AGP Voltage Adjust" setting "1.8V" selectable
- Item "CPU Vcore Select" settings "1.300V", "1.425V", "1.450V", "1.475V", "1.500V", "1.525V" selectable
- changed Epa Logo